K2 ground quartz X1 X7

[Christophe F8ACF-56]

hello list

it is important to seal the quartz for grounding on the side X7 to X11, I realize that I have welded on the top so the two earthed by quartz

Like this, or I leave it again?, this is a misunderstanding on my part in the translation.

thank you for your opinion
 
73 , Christophe F8ACF-56
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Christophe,

I sent 2 photos off list which show the proper grounding of X7 to X11.
Bend the wires into contact with the base of the crystal first to make
the soldering task easier.

73,
Don W3FPR

On 3/12/2013 9:48 AM, Christophe F8ACF-56 wrote:

> hello list
>
> it is important to seal the quartz for grounding on the side X7 to X11, I realize that I have welded on the top so the two earthed by quartz
>
> Like this, or I leave it again?, this is a misunderstanding on my part in the translation.
>
> thank you for your opinion
>  
> 73 , Christophe F8ACF-56
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html