K2 inductor wattage

[John Cooper]

The 10uH inductors that go on the bottom of the rf board that are in the transmitter area of schematic are what size?   The ones I have are equivalent to 1/4watt resistor.  But the silkscreen looks more like 1/2watt size and it doesnt specify anywhere I can see in manual.  I ordered these off ebay and not from elecraft.  

John Cooper WT5Y

Sent from my Cricket smartphone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

John,

The old inductors were larger than what is being used today.  The new
ones are about the size of a 1/4 watt resistor.

73,
Don W3FPR

On 12/18/2013 4:26 PM, John Cooper wrote:
> The 10uH inductors that go on the bottom of the rf board that are in the transmitter area of schematic are what size?   The ones I have are equivalent to 1/4watt resistor.  But the silkscreen looks more like 1/2watt size and it doesnt specify anywhere I can see in manual.  I ordered these off ebay and not from elecraft.
>
> John Cooper WT5Y
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html