K2 inventory question

[Bill Scovell]

Just completing inventory check for my second K2 (#4313)all well except can't find R50 and R58 (both 1/2 watt so not on the bandolier) are these normally loose in the RFb bag? or do they lurk in some other spot and I've had a senior moment and missed them?. I wouldn't normally bother the reflector for two R's but R50 is 1.5 Ohms and low values not easy to come by here.
TIA Bill / VK4SQ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-2]

Bill,

Elecraft continually improves things - we all know that.  So now you will
find R50 and R58 on the strip of resistors - at least they were that way for
SN4192 when I assembled it.  Yes, it has not always been that way - those
resistors were previously shipped loose in the RFb bag, so your memory is
working well.

73,
Don W3FPR

Life is what happens when you are making other plans

----- Original Message -----

Just completing inventory check for my second K2 (#4313)all well except
can't find R50 and R58 (both 1/2 watt so not on the bandolier) are these
normally loose in the RFb bag? or do they lurk in some other spot and I've
had a senior moment and missed them?. I wouldn't normally bother the
reflector for two R's but R50 is 1.5 Ohms and low values not easy to come by
here.
TIA Bill / VK4SQ


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[johnny-52]

The two resistors should also be on the bandolier.

73

Johnny VR2XMC
----- Original Message -----
From: "Bill Scovell" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, July 04, 2004 1:46 PM
Subject: [Elecraft] K2 inventory question


Just completing inventory check for my second K2 (#4313)all well except
can't find R50 and R58 (both 1/2 watt so not on the bandolier) are these
normally loose in the RFb bag? or do they lurk in some other spot and I've
had a senior moment and missed them?. I wouldn't normally bother the
reflector for two R's but R50 is 1.5 Ohms and low values not easy to come by
here.
TIA Bill / VK4SQ
_______________________________________________

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Hisashi T Fujinaka]

SN4355 has the resistors on the strip. So far, so good, I'm past the
initial checks on the RF board (i.e. my control board and front panel
work).

I got an incredible headache sorting the caps. My wish for future
builders: sort parts in a more sensible order so the RF board parts are
divided into the stages. I know that means more labor at Elecraft, but
so far that's my main complaint. :)

On Sun, 4 Jul 2004, Don Wilhelm wrote:

> Bill,
>
> Elecraft continually improves things - we all know that.  So now you will
> find R50 and R58 on the strip of resistors - at least they were that way for
> SN4192 when I assembled it.  Yes, it has not always been that way - those
> resistors were previously shipped loose in the RFb bag, so your memory is
> working well.
>
> 73,
> Don W3FPR
>
> Life is what happens when you are making other plans
>
> ----- Original Message -----
>
> Just completing inventory check for my second K2 (#4313)all well except
> can't find R50 and R58 (both 1/2 watt so not on the bandolier) are these
> normally loose in the RFb bag? or do they lurk in some other spot and I've
> had a senior moment and missed them?. I wouldn't normally bother the
> reflector for two R's but R50 is 1.5 Ohms and low values not easy to come by
> here.
> TIA Bill / VK4SQ
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

--
Hisashi T Fujinaka - [hidden email]
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Laurie Landry]

Bill,
    Look at the last two resistors on the Bandolier.  That is where mine
were on #4248.
Laurie, VE1AWJ


----- Original Message -----
From: "Bill Scovell" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, July 04, 2004 2:46 AM
Subject: [Elecraft] K2 inventory question


Just completing inventory check for my second K2 (#4313)all well except
can't find R50 and R58 (both 1/2 watt so not on the bandolier) are these
normally loose in the RFb bag? or do they lurk in some other spot and I've
had a senior moment and missed them?. I wouldn't normally bother the
reflector for two R's but R50 is 1.5 Ohms and low values not easy to come by
here.
TIA Bill / VK4SQ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft    Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com