K2 - key pops

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 - key pops

K4JQV
Greetings;
I have an older K2 #2676 and I have noticed that sometimes (somewhat regularly actually) when using narrower filters on CW (like 400, 200 hz) I get a crackle/pop/psst sound on keying. I am guessing that I need to do the keying waveform mod right?

Thanks!
Jake K4JQV

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2 - key pops

Don Wilhelm-4
Jake,

Yes, you should add the keying waveform mod - especially if you have the
KPA100 installed.  BUT, that has to do with the transmitted signal and
keyclicks.

It has nothing to do with the receive part of the K2 during keying.
Go to the menu T-R parameter, and set it to something greater than 006
(6 milliseconds) - then tap the DISPLAY button to change the 8R behavior
to HOLD.

You can try variations on the delay time and the 8R setting to see if
any of those change your receive "pop"  characteristics.

73,
Don W3FPR

On 11/7/2011 9:51 PM, jacob chambers wrote:
> Greetings;
> I have an older K2 #2676 and I have noticed that sometimes (somewhat regularly actually) when using narrower filters on CW (like 400, 200 hz) I get a crackle/pop/psst sound on keying. I am guessing that I need to do the keying waveform mod right?
>
> Thanks!
> Jake K4JQV
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html