> A couple of ideas: Make sure the trimmers that tune the bandpass filters
> are not set at the extreme end of their range. Also check that T2 and T4
> are wound properly, as shown in the manual.
>
> G4BUE wrote:
>
> > Did you solve your problem, Ozzie?
> >
> > I ask because I have the same problem on one of my K2s and cannot
> fix it.
> >
> > Thanks and 73 de Chris, G4BUE
> >
> >
> >
> > W6ICM wrote:
> >> My K2 has been working OK, until now...
> >> 80, 40 and 30 it has full output, but the higher bands, the output is
> >> down.
> >> Did the alignment for those bands as per the manual. Didn't make any
> >> difference.
> >> I get 4-5 watts on 20 and 18 and 21 about 3 w, ten is down to 2 watts.
> >> Receiver sensitivity is OK.
> >> Any "words of wisdom" will be greatly appreciated.
> >> 73
> >> Ozzie, w6icm
>
>
> --
> 73,
> Vic, K2VCO
> Fresno CA
>
http://www.qsl.net/k2vco> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@...
> <
http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1115595&i=0>
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
> ------------------------------------------------------------------------
> View message @
http://n2.nabble.com/K2-low-output-tp461601p1115595.html> To start a new topic under Elecraft, email
>
[hidden email]
> To unsubscribe from Elecraft, click here
> <
http://n2.nabble.com/subscriptions/Unsubscribe.jtp?code=dzZpY21ANGZhc3QubmV0fDM2NTc5MXwtMTIwNjU4NDE4Nw==>.
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG -
http://www.avg.com
> Version: 8.0.169 / Virus Database: 270.7.1/1688 - Release Date: 9/24/2008 6:29 AM
>
>
Locked
