K2 menu issue

[Elecraft mailing list]

I've a problem using my K2/100 with KAT100: every time I switch off K2 the
ATU menu selection is not stored and switching on again the ATU selection is
always on CAL, so I've to change it to AUTO in order to use KAT100.

This is a very annoying situation: any suggestion?

Thank you in advance

IZ0DIO - Giorgio

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Georgio,

Are you exiting the menu (two taps - not a hold - of the menu button)
after you select auto?  If not, the behavior will be as you describe.

73,
Don W3FPR

On 9/17/2017 1:42 AM, IZ0DIO via Elecraft wrote:
> I've a problem using my K2/100 with KAT100: every time I switch off K2 the
> ATU menu selection is not stored and switching on again the ATU selection is
> always on CAL, so I've to change it to AUTO in order to use KAT100.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]