K2 microphone question

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 microphone question

oe9fwv
I am going to finishing the SSB board (with the QRP-Project modification
included) in some days, as soon as the parts I need arrived.
I have several microphones I could use, so maybe you can give me some
advice.
I have one Icom SM-8 microphone - is there a circuit diagram around for this
type of microphone? I read in the manual of the K2 that some information for
microphone jumpering should be on the Elecraft website, but I did not find it
yet.
Then I have a Kenwood hand microphone (from a VHF SSB transceiver),
and a Heil Pro Headset.
I have also read about the good idea to make a plug for each type of
microphone from discarded IDE plugs. (several around here)
Maybe there is a list of microphones with my SM-8 type listed?

73! de Werner
OE9FWV


--  
"I may be lost, but I know exactly where I am!" (GPS reading in Sibiria)
 
Goals are deceptive - the unaimed arrow never misses.



PGP-Key: <http://www.qsl.net/oe9fwv/furlan.asc>
Fone +43 5522 75013
Fax +43 820 555 85 2621
Mobile      +43 664 6340014
K2 #5203
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K2 microphone question

John Lonigro
Werner:
I went to the ICOM website and did a search on the SM-8 microphone. I
found the IC-718 uses the same mic, so I suggest you download the manual
for the IC-718 and you should find enough info about the microphone and
the connector to get it working on your K2. I don't think there's a
circuit diagram for it, but there is a pin-out for the connector on the
radio and you can figure it out from there. You can do the same for
other mics you may be interested in interfacing with the K2.

73's and good luck,

John AA0VE


Dr. Werner Furlan wrote:

>I have one Icom SM-8 microphone - is there a circuit diagram around for this
>type of microphone?
>
>73! de Werner
>OE9FWV
>
>  
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com