Hello everyone, well I finished the inventory last Thursday night, started the control panel around 4:00pm finished it about 10:00 pm, started front panel Saturday morning around 9:00am and finished it about 1:30 to 2:00. I have started the RF board Sunday, and completed the first round of power up test all was well. I am now just finishing all the caps on page 52, had to take a break after trying to read all those little numbers on them, so far that has been the hardest even with a magnifiy glass and super bright light.
My one question about the first power up test, there is a step where going through the menu that you select Graph - Bar, the manual states that all 10 bars should light up. I get all of them up to the "s10" but not all 10 bars. I know all 10 will light up from the ajustments in the steps earlier. Saw all of them light up when ajusting s-meter and agc in earler steps. Is this normal? Was all 10 bars suppose to light up or was it suppose to just go to the "s10" I mean you ajust it back to the s10 in previous steps so was not sure.
73
Ke5ebs
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_2______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
