Problem solved.
I Just removed the KIO2 and the KXV2, tested the K2 (all OK) reinserted the
KXV2 (all OK) and finally reinserted the KIO2 (all OK)
Magic hands I suppose :-).
Have a nice weekend.
73's, Evert PA2KW
>>>>
After installing my KIO2 module in the K2 (I want my KPA100 remote) I did
all proposed tests to see if the KIO was working. I was using the K2-remote
program " C 2001 Elecraft LLC " and changing settings on 7 Mc. All looked
fine, and up to the end.
I finally completed the mechanical procedure and was ready for a real life
test. I noticed that only my 7MC band (receiver) seems to be dead or deaf.
>From all bands I can get power (10W) into the dummy except for 7 MC where
it
stops with 0.1 W. It just looks like the remote control program messed up
something, but what? No idea. I do have the KXV60 installed as well for the
144 Mc / 28 Mc transverter job.
>>>>>>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
