Yes that's right Don but in my experience that's not been a hindrance.
I will say that using a second RX with an inferior performance to the
main K2 encouraged me to build the second K2 !!
73 Bob G3PJT
Don Wilhelm wrote:
> Bob and all,
>
> Just one observation since someone mentioned cross-band operation. With
> this scheme, the Low Pass filters of 'K2T' are attached to the antenna, the
> 2nd receiver would ideally be tuned to a band lower in frequency than the
> transmitting K2 - tuning the 2nd receiver to a higher band will likely
> result in weak signals due to the Low Pass Filter. Same band operation
> should be OK.
>
> 73,
> Don W3FPR
>
>
>> -----Original Message-----
>>
>
>
>> Hi
>>
>> You can see my version at
>>
>>
http://uk.geocities.com/g3pjt@.../>>
>> I am currently re engineering this set up to improve frequency swopping
>> etc. Stewart G3RXQ has a surface mount version of the diode switch which
>> is FAR superior to my discrete version.
>>
>> But works OK and as others have said very useful for spilt DXing.
>>
>> 73 Bob G3PJT
>>
>
>
>
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 268.4.4/319 - Release Date: 4/19/2006
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
