Tomy,
Check RFC15 on the bottom of the RF Board. Check it with an ohmmeter -
just because it may have 5 volts on both leads does not mean it is not
open. If you find it open, you may temporarily replace it with a jumper.
73,
Don W3FPR
Tomy wrote:
> Anybody ever have the audio sound like it is under water? Just happened. I have new firm ware to update it just have not done so. Any ideas what I should look for?
> Thanks
>
> 73! Tomy Ivan kf7gc
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2720 - Release Date: 03/03/10 02:34:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html