Look for solderbridges or components that has no conection around the Low
pass filter and PA transistors. Specialy Q7 and Q8. It's easy to forget
soldering an pin on the relays.
73 de Thomas LA3PNA
----- Original Message -----
From: "Mike, W9QS" <
[hidden email]>
To: "elecraft" <
[hidden email]>
Sent: Friday, December 14, 2007 3:05 AM
Subject: [Elecraft] K2 trouble
>I have a problem with the first part of section 3
> testing. I set the power level to 2.0. When I press
> and hold "tune" I get "HI CUR" on the LCD for about
> 1/2 second and power is at .1. Nothing seems to be
> warm. Q6, 7 and 8 all seem Ok and not shorted.
>
> Anything I might have missed before I start taking it
> all apart again?
>
>
>
> 73,72
>
> Mike, W9QS
> EX: KN6TBP (1956), K1DGQ, DL4KM, K5LJN, W9FRR, W9KVF
>
> K2, OHR500, OHR100A, SP1
>
>
>
> ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
