John,
Yes, you have it correct. Each pass of the wire through both holes is one
turn.
Note for the near future - when you put in the 'links', these bare wires go
only through one hole of the binocular core.
73,
Don W3FPR
-----Original Message-----
Hope Memorial Day is fun (and meaningful) for all.
I am rechecking T4. Leads 1 & 2 are Green hookup wire in 2 turns on
the binocular core, leads 3 & 4 are white in 3 turns.
I think I have wound it correctly...it looks the same as the diagrams
in Figures 6-28 and 6-29.
Just to be sure I understand, would one turn be a simple "U" through
the core? And 2 turns equals two wires (as it were) within each
tunnel in the core? Then, 3 turns would be three wires (as it were)
on each tunnel in the core.
Do I have this correct?
Thanks,
John
AB8WH
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.7.3/350 - Release Date: 5/28/2006
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com