Curt,
Those are not transformers, but are shielded inductors.
I can't tell from your description, but they are either 4.7 uHy or 1 uHy
inductors. If the tuning slug has a flat adjustment slot all the way
across the top of the slug, it is the 4.7 uHy, but if the slot is small,
it is a 1 uHy.
73,
Don W3FPR
On 5/28/2013 8:27 AM, Curt wrote:
> When I built my K2 several years ago, there were several tunable coils left over (?!). The
> coils used for the build had labeling and stripes per the build instructions. BTW, the K2 works FB.
>
> The leftovers are 10mm on each side, with grey slug, the only label anywhere is "coils" printed
> twice on top. Bottom has three pins on one side, two on the other. There is a number "46" stamped
> into the plastic ibetween the pins.
>
> Would anyone be able to help better identify these coils? I have a homebrew project in need of
> some transformers.
>
> 73, Curt KB5JO
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
