John,
It is rare to change the BFO crystals as part of an A to B upgrade.
The BFO crystals should be usable, but the IF crystals should be
replaced with new ones. The crystals were controlled for motional
inductance starting at about SN 2560 and result in a much better
filter. Elecraft sells a set of 7 matched crystals. If you also have
the KSB2 option for this K2, order the set of 14 and discard the
original IF crystals.
73,
Don W3FPR
John wrote:
> I purchased a K2 kit that was bought in 1999 and have been upgrading
> it to "B". This kit was never built and the crystals are a different
> frequency than the newer ones.
> Can I use the old crystals or will it suffer performance with the old
> ones?
> The "B" version BFO calls for 4.9152 MHz and the ones in the "A"
> version I have are 4.915.
> The "B" version calls for 4.9136 crystals and the ones in the "A"
> version I have are 4.915.
> Thanks.
> John.
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
