K2 using LP-Pan2 to drive the PX3

[Al Sather]

I just got a PX3 and in the midst of learning to use it.
I also have a K2 with an added IF port (Z1000 buffer kit,Clifton
Laboratories).
My original intent was to use Larry Phipps', N8LP, LP-Pan-2, with my
modified K2 and software like NaP3 as a panadapter, but now I have a PX3.

Originally I used this setup with my Kenwood TS-850 and an external
sound card. The LP-Pan2 has crystals for both radios.

Now my question, can the K2 using LP-Pan2 I/Q ports be used to drive the
PX3, and if so how well will it integrate with the PX3?

73, Al ve7ear
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

The PX3 can decode the I/Q outputs from the LP-Pan just fine - you will
have a spectrum display.
However, integration is quite another question.  You will not have the
frequency display as you would when connected to the KX3.

73,
Don W3FPR

On 7/9/2015 7:51 PM, Al Sather wrote:
> I just got a PX3 and in the midst of learning to use it.
> I also have a K2 with an added IF port (Z1000 buffer kit,Clifton
> Laboratories).
> My original intent was to use Larry Phipps', N8LP, LP-Pan-2, with my
> modified K2 and software like NaP3 as a panadapter, but now I have a PX3.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]