K2 with KPA500 and KAT500

[RobertG]

I'm  going to use my K2 for Field Day. In prep, I'm putting the K3 aside
and putting the K2 back in the station lineup in order to  re-acquaint
myself with the its operation. Looking at the cabling diagrams in the
KPA500/KAT500 manuals, an RCA jack line from the K2 to the tuner and
another RCA jack line from the tuner to the amp looks pretty straight
forward. With this setup, do I disconnect the keying/integration cables
that normally connect the K3, KPA500 and KAT500? Assuming so, are there
any other aspects of using the K2 with the other K-Line units to which I
should pay attention? Thanks.

...robert
--
Robert G Strickland, PhD ABPH - KE2WY
[hidden email]
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]