K2DSP - Does not remember settings

[joey mcg]

My K2DSP does not remember it's settings upon power-down.  I can place it in bypass mode before powering down, but it does not remain in bypass upon power-up.
   
  Is this normal?
   
  Thanks.
   
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[w6jd]

That is right. the KDSP2 has no memory at power down. It is my understanding that
there is not enough processor memory to store the parameters.

Doug
W6JD
-------------- Original message --------------
From: joey mcg <[hidden email]>

> My K2DSP does not remember it's settings upon power-down. I can place it in
> bypass mode before powering down, but it does not remain in bypass upon
> power-up.
>
> Is this normal?
>
> Thanks.
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft 
>
> Help: http://mailman.qth.net/subscribers.htm 
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

>> My K2DSP does not remember it's settings upon power-down. I can place it in
>> bypass mode before powering down, but it does not remain in bypass upon
>> power-up.

The KDSP2 does remember settings.  Bypass is the exception.  That is
because the DSP is powered down.  It doesn't remember you want it to be
powered down when you power it back on, so it powers back on.  If you
want it to be in bypassmode, you have to tell it so when you power it up.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[w6jd]

I'm sorry, I didn't make myself clear. What is not saved is the state of the KDSP at power off (e.g.
which filter has been selected, etc) of course all the configuration parameters are retained.

Doug
W6JD

-------------- Original message --------------
From: Lyle Johnson <[hidden email]>

> >> My K2DSP does not remember it's settings upon power-down. I can place it in
> >> bypass mode before powering down, but it does not remain in bypass upon
> >> power-up.
>
> The KDSP2 does remember settings. Bypass is the exception. That is
> because the DSP is powered down. It doesn't remember you want it to be
> powered down when you power it back on, so it powers back on. If you
> want it to be in bypassmode, you have to tell it so when you power it up.
>
> 73,
>
> Lyle KK7P
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com