K2DSP adjustments

[John Wiener-2]

Hi I've had my K2 for about 7 yrs now.  wanted to play with the DSP controls a bit…I find I cannot set CF1 (CW digital filter 1) to LOW PASS
as indicated in the directions…

any thoughts?

John
AB8O
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

John,

Can you get to the CW Filter display (C.1  .60  .80 for example)?
If so, the first number is the center frequency, and the 2nd is the
filter width.
The one with the blinking "." is the one that will be changed by the
BAND+ and BAND- buttons.
Set the center frequency for the highest value and the width to the
wildest value and it should switch to LOPASS.

In other words, keep tapping the BAND+ button for the value that has the
blinking "." and then hold BAND- to change the blinking "." to the other
value - keep tapping BAND+ until you see LOPASS.

73,
Don W3FPR

On 9/2/2013 4:16 PM, John Wiener wrote:

> Hi I've had my K2 for about 7 yrs now.  wanted to play with the DSP controls a bit…I find I cannot set CF1 (CW digital filter 1) to LOW PASS
> as indicated in the directions…
>
> any thoughts?
>
> John
> AB8O
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html