I recently purchased the K3/0 Mini and I still can't get it configured correctly. I have it about 90% working.
Is there a DEFINITIVE guide that shows how to configure the K3/0 with the RigTalk to work with a complete K-Line (K3, P3, KPA 500, KTA 500) and CAT logging to a computer?
I have the K3/0 working but can't seem to get the input and output comm ports of the RigTalk to be in parallel or transparent to serial data. Also when using the K3/0 the connection to the K3 will drop (hard wired local LAN) and the KPA 500 will switch to standby. Since the serial ports on the RigTalk are configured properly it is not possible to bring the KPA 500 back online via the remote tool (those packets are not being passed properly).
Elecraft does not seem to have good documentation all in one place on how to configure this configuration with their equipment.
All help is most appreciated.
73,
Mack
W4AX
73,
Mack
W4AX
Locked
