I am testing RemoteHamRadio and have used WSJT-X under their web
application. This has a few annoying limitations compared to running
locally from my K3S.
RemoteHamRadio now supports connecting the K3/0 Mini to the PC with only
a USB cable, i.e. no remoterig box is required. They state that the
only difference between the two setups is that USB does not support
direct FSK at this time. They also have told me that WSJT-X does not
support serial over ethernet very well hence they do not recommend
using CAT. Hmmmm....
I run WSJT-X JT9 and JT65 as my primary mode on my K3S. I always use
the split mode feature to allow transmission in the sweet spot. VOX for
TX would be OK but having to do everything manually would not be the
WSJT-X experience.
Has anyone out there run this configuration and if so what is your
experience? If it works well then a full remote system running WSJT-X
with RemoteHamRadio would require only a K3/0 mini which is a pretty
sweet deal.
Hopefully someone had already tested this system. I would rather not
have to buy a K3/0 Mini to test it. It is tempting though ..
AL7CR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
