K3/0 (Original) odd behaviour

[Gerry Hull]

Hi All,

I have a K3/0 that I've had for quite a while.
I remote with the K3/0 mini, but would love to have the K3/0 for SO2R.

I can't seem to get the K3/0 communicating, though it worked fine in
the past.

Here's the weird symptoms:

If I use the K3 Utility, I can communicate fine with it.   It finds the
K3/0 right away,
and even updated the firmware.

However, if I connect it to an RC, it does nothing at power up.

If I connect a Terminal program to it, I see it issue a BREAK (Hex 00) at
power up and nothing else.  I presume it should send a PS1; to turn on the
remote K3 Power?

Any help or hints appreciated.


73,

Gerry W1VE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]