K3/0 Remote setup and Brainboxes

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3/0 Remote setup and Brainboxes

Paul DeFelice

As part of my remote setup, I purchased a Brainboxes ES-257 2 Port RS232
ethernet to serial adapter to control a couple of serial port accessories. I
can control the ES-257 and the attached equipment using their Boost.LAN
Manager software over my LAN but cannot get the device configured to accept
control using my external IP. Any suggestions or direction would be much
appreciated.


73,


Paul K9NU


 


 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3/0 Remote setup and Brainboxes

John Simmons
  Paul,

You  need to configure your router/firewall to forward the port used by
the ES-257 from the router to the device. You will need to assign a
static IP to the device. Serial  port 1 uses port 9001, serial port 2
uses port 9002. Look at your router documentation and search the web for
port forwarding info.

73,
John NI0K

------ Original Message ------
From: "Paul A DeFelice" <[hidden email]>
To: [hidden email]
Sent: 1/5/2014 9:47:46 AM
Subject: [Elecraft] K3/0 Remote setup and Brainboxes

>
>As part of my remote setup, I purchased a Brainboxes ES-257 2 Port
>RS232
>ethernet to serial adapter to control a couple of serial port
>accessories. I
>can control the ES-257 and the attached equipment using their Boost.LAN
>Manager software over my LAN but cannot get the device configured to
>accept
>control using my external IP. Any suggestions or direction would be
>much
>appreciated.
>
>
>73,
>
>
>Paul K9NU
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3/0 Remote setup and Brainboxes

Paul DeFelice
In reply to this post by Paul DeFelice
Thanks for your information, John. This morning I went on the Brainboxes web
site and took advantage of their support page. All is set up and fine now.

 

73,

Paul K9NU

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html