Hi all. I could use some advice. I have spent the last several months building the complete K-Line for my MD summer QTH. I am now preparing to operate via RemoteRig from a K3/0 located remotely. I was hoping for a test run in Sweepstakes this weekend.
Everything was working fine, and starting yesterday, I cannot bring up the remote K3 in MD. I just get a busy signal at the control end, at my current location in NJ.
In the past, when this has happened, cycling my control end RemoteRig and/or router has fixed it. Not helping now.
I have the ability to remotely cycle power to the radio end RemoteRig, the K3, and the remote router. I can use Logmein to the radio end PC to start microbit to examine and restart the radio end RemoteRig. That doesn't solve it, and all parameters look normal.
I can remotely cycle power to the radio end router. Still no joy.
I have cameras located in front of the radio end (remote) gear in MD. The green light on the radio-end RemoteRig glows solid green a few seconds after I cycle it, so it is definitely talking to the router. The router is talking to the internet because I can remotely control all these other functions --- Logmein, power switch, cameras --- from a distance.
Nothing I do brings up the remote K3. I had the same problem yesterday, and after a couple hours of trying all of the above, it suddenly came back to life --- enabling me to work K9W.
Does anyone have any suggestions?
Regards,
Brian W3BW
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278 Skype bwruble
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
