Solved. For those checking the archives, it was an outdated k3util,
upgraded that and all went good.
Pf
>>>>> "Pierfrancesco" == Pierfrancesco Caci <
[hidden email]> writes:
Pierfrancesco> Hello,
Pierfrancesco> I'm trying the 1 mW tx calibration and it fails like this:
Pierfrancesco> Elecraft K3 Utility for Linux Revision 1.13.4.15
Pierfrancesco> K3 MCU revision 04.81. RS-232 speed 38400 bps.
Pierfrancesco> Starting 1 milliwatt calibration.
Pierfrancesco> Calibrating at 1.900 MHz
Pierfrancesco> Calibrating at 3.750 MHz
Pierfrancesco> IsSamplingComplete: Unexpected response 'DB 2.08 MW;' to ''.
Pierfrancesco> Calibration power settled at ' 2.08 MW;'
Pierfrancesco> 1 milliwatt calibration failed.
Pierfrancesco> Elapsed time: 25.2 secs
Pierfrancesco> Any clues?
Pierfrancesco> The dummy load I've connected is flat at 51 Ohm all throughout the
Pierfrancesco> range (tested with miniVNA).
Pierfrancesco> Pf
Pierfrancesco> --
Pierfrancesco> Pierfrancesco Caci, ik5pvx
Pierfrancesco> ______________________________________________________________
Pierfrancesco> Elecraft mailing list
Pierfrancesco> Home:
http://mailman.qth.net/mailman/listinfo/elecraft Pierfrancesco> Help:
http://mailman.qth.net/mmfaq.htm Pierfrancesco> Post: mailto:
[hidden email]
Pierfrancesco> This list hosted by:
http://www.qsl.net Pierfrancesco> Please help support this email list:
http://www.qsl.net/donate.html Pierfrancesco> Message delivered to
[hidden email]
--
Pierfrancesco Caci, ik5pvx
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
