K3/10 No Audio on transmit

[george-2]

I am trying to get my newly built K3/10 operating on SSB; but, I get no
audio using the MH2 mike.  I have configured the K3 for front panel
audio.

I set the unit to test and monitor; but, hear nothing and see nothing on
the output.  I suspect that I have configured something wrong; but,
can't seem to find the issue.

Anyone have any thoughts?

George
K2CM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

Have you turned on "bias" (select fPL and tap "2")?  The MH2 is an
electret mic and requires bias (DC on the mic line) to operate.

73,

    ... Joe, W4TV


On 9/4/2012 11:41 PM, [hidden email] wrote:

> I am trying to get my newly built K3/10 operating on SSB; but, I get no
> audio using the MH2 mike.  I have configured the K3 for front panel
> audio.
>
> I set the unit to test and monitor; but, hear nothing and see nothing on
> the output.  I suspect that I have configured something wrong; but,
> can't seem to find the issue.
>
> Anyone have any thoughts?
>
> George
> K2CM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html