K3/100 PA Removal

[reliant325]

I have a K3 which I recently inherited.

Unknown to me at the time, it has no TX/RX on 160m. The Guys at Support led to look for a possible fault in the Low Pass Filter area.
I believe that this is beneath the 100W PA unit on the main board.

What is the easiest/safest way to remove the PA unit without causing unnecessary damage?
Also, is there a layout drawing of the main board?

Thanks Roger G0IUW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill W]

Roger,
Have you checked the Elecraft website and reviewed the K3 assembly manual that is available on-line.
It should provide all the information you need to successfully remove the PA unit. It has quit a few illustrations for reference.
Bill-W0BBI