K3-100

[Brian]

Hello, my first question on the site!

Can anyone tell me what the set-up is for configuring the filters please.

my present set-up is:

FM= 1300khz. Slot 1

AM-TX= 600khz. Slot 2

CW/SSB= 2.70khz. Slot 3

Data/Am= 0.50khz Slot 5

Are these correct, and / or what is the correct configuration please?

Many thanks in anticipation.

Brian
2E0BWQ

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ke9uw]

You mean 13 KHz and 6 KHz, anyway, looks good. That's how mine are.

Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)

On Mar 25, 2013, at 7:07 AM, "Brian North" <[hidden email]> wrote:

> Hello, my first question on the site!
>
> Can anyone tell me what the set-up is for configuring the filters please.
>
> my present set-up is:
>
> FM= 1300khz. Slot 1
>
> AM-TX= 600khz. Slot 2
>
> CW/SSB= 2.70khz. Slot 3
>
> Data/Am= 0.50khz Slot 5
>
> Are these correct, and / or what is the correct configuration please?
>
> Many thanks in anticipation.
>
> Brian
> 2E0BWQ
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Hello, Brian.

Install the Elecraft K3 Utility, it's available at
http://www.elecraft.com/K3/k3_software.htm#k3util

Start the K3 Utility.

Navigate to the "Configuration" tab. Click "Configure Crystal Filters".
Click "Help" at the lower right corner. Follow the instructions in Help.  

You might also want to review the section of the K3 Owner's Manual available
at http://www.elecraft.com/K2_Manual_Download_Page.htm#K3, see page 46.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Brian North
Sent: Monday, March 25, 2013 5:03 AM
To: [hidden email]
Subject: [Elecraft] K3-100

Hello, my first question on the site!

Can anyone tell me what the set-up is for configuring the filters please.

my present set-up is:

FM= 1300khz. Slot 1

AM-TX= 600khz. Slot 2

CW/SSB= 2.70khz. Slot 3

Data/Am= 0.50khz Slot 5

Are these correct, and / or what is the correct configuration please?

Many thanks in anticipation.

Brian
2E0BWQ

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Brian:

Slot 1: 13 kHz, not 1300 kHz.  You should enable this for receive for all
modes. This is your Tx FM filter.
Slot 2: 6 kHz, not 600 kHz. You should enable this for receive for all modes
except perhaps FM. This should be your Tx AM filter.
Slot 3. 2.7 kHz. I would enable this for receive for all modes including AM,
but not FM. This should be your Tx SSB and Tx CW filter.
Slot 5:  500 Hz: I would enable this for CW, USB, LSB, and Data, but not AM
or FM.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Brian North
Sent: Monday, March 25, 2013 5:03 AM
To: [hidden email]
Subject: [Elecraft] K3-100

Hello, my first question on the site!

Can anyone tell me what the set-up is for configuring the filters please.

my present set-up is:

FM= 1300khz. Slot 1

AM-TX= 600khz. Slot 2

CW/SSB= 2.70khz. Slot 3

Data/Am= 0.50khz Slot 5

Are these correct, and / or what is the correct configuration please?

Many thanks in anticipation.

Brian
2E0BWQ

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

 > Slot 5:  500 Hz: I would enable this for CW, USB, LSB, and Data,
 > but not AM or FM.

Not useful for USB/LSB ... I only enable 500 Hz for CW and DATA

73,

    ... Joe, W4TV


On 3/25/2013 8:56 AM, Dick Dievendorff wrote:

> Brian:
>
> Slot 1: 13 kHz, not 1300 kHz.  You should enable this for receive for all
> modes. This is your Tx FM filter.
> Slot 2: 6 kHz, not 600 kHz. You should enable this for receive for all modes
> except perhaps FM. This should be your Tx AM filter.
> Slot 3. 2.7 kHz. I would enable this for receive for all modes including AM,
> but not FM. This should be your Tx SSB and Tx CW filter.
> Slot 5:  500 Hz: I would enable this for CW, USB, LSB, and Data, but not AM
> or FM.
>
> 73 de Dick, K6KR
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Brian North
> Sent: Monday, March 25, 2013 5:03 AM
> To: [hidden email]
> Subject: [Elecraft] K3-100
>
> Hello, my first question on the site!
>
> Can anyone tell me what the set-up is for configuring the filters please.
>
> my present set-up is:
>
> FM= 1300khz. Slot 1
>
> AM-TX= 600khz. Slot 2
>
> CW/SSB= 2.70khz. Slot 3
>
> Data/Am= 0.50khz Slot 5
>
> Are these correct, and / or what is the correct configuration please?
>
> Many thanks in anticipation.
>
> Brian
> 2E0BWQ
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

I believe Dick did not state explicitly, the 2.7 kHz filter must be
enabled for transmit on DATA modes too.  See the Filter Installation
section in Appendix A of the manual - especially the information below
the filter images on page 78.

Any filter can be enabled for receive, but some do not make much sense,
particularly for the 500 Hz filter.

73,
Don W3FPR
On 3/25/2013 8:56 AM, Dick Dievendorff wrote:

> Brian:
>
> Slot 1: 13 kHz, not 1300 kHz.  You should enable this for receive for all
> modes. This is your Tx FM filter.
> Slot 2: 6 kHz, not 600 kHz. You should enable this for receive for all modes
> except perhaps FM. This should be your Tx AM filter.
> Slot 3. 2.7 kHz. I would enable this for receive for all modes including AM,
> but not FM. This should be your Tx SSB and Tx CW filter.
> Slot 5:  500 Hz: I would enable this for CW, USB, LSB, and Data, but not AM
> or FM.
>
> 73 de Dick, K6KR
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Brian North
> Sent: Monday, March 25, 2013 5:03 AM
> To: [hidden email]
> Subject: [Elecraft] K3-100
>
> Hello, my first question on the site!
>
> Can anyone tell me what the set-up is for configuring the filters please.
>
> my present set-up is:
>
> FM= 1300khz. Slot 1
>
> AM-TX= 600khz. Slot 2
>
> CW/SSB= 2.70khz. Slot 3
>
> Data/Am= 0.50khz Slot 5
>
> Are these correct, and / or what is the correct configuration please?
>
> Many thanks in anticipation.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html