Make sure that the CONFIG:KPA3 setting shows nor, which just means
installed and not bypassed.
Try running the TX gain calibration. 1W is pretty far off from a 100W
full scale, but at least the procedure will give you some idea if
there is something wrong besides the gain setting.
I believe support will ask you to run the calibration anyway, prior to
any other remedy.
73,
matt W6NIA
On Sun, 6 Oct 2013 12:50:17 -0700 (PDT), you wrote:
>Hello to list, I recently acquired a K3/100 sn# 248 that has been working great up today.
Just made a few CW contacts but today can only get 1 watt out
regardless of power setting into dummy load. KXV3 set to nor. Cables
all okay, grounds okay. This is a wonderful radio with many features
and I am guessing I have misadjusted something but having rechecked
CONFIG/MAIN settings etc cannot see obvious reason for problem. Any
hints much appreciated. 73, John VE3LZ
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post: mailto:
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.htmlMatt Zilmer, W6NIA
www.elecraft.com
831-763-4211 x129
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
