On 3/15/2012 3:13 PM, Wayne Burdick wrote:
> The only easy thing to change in this regard is the 1N4007. It
> probably drops close to a volt, and could be replaced with a 1N5817,
> etc.
That would minimize the drop but is D34 even necessary? You already
have a shunt diode (D35) across the supply side of the fuse that should
protect the K3 if the user applies negative voltage to the 12V Out.
73,
... Joe, W4TV
On 3/15/2012 3:13 PM, Wayne Burdick wrote:
> The only easy thing to change in this regard is the 1N4007. It probably
> drops close to a volt, and could be replaced with a 1N5817, etc. But if
> you want to pull more current, you also have to change the choke and the
> self-resetting fuse. We're working on that.
>
> Wayne
>
> On Mar 15, 2012, at 11:53 AM, Joe Subich, W4TV wrote:
>
>>
>> Instead of simply raising the current limit, you should be addressing
>> the voltage issues as well. With 1.7V (SB530 and 1N4007) of diode
>> drop plus I^2*R losses in two chokes and the switch, the "+12V" is
>> already low (11.8V) with a 13.8V supply. Run the K3 on battery or
>> figure in a typical 0.8V-1.2V sag in the input supply in transmit and
>> the "+12V" output is less than 10.5V.
>>
>> 73,
>>
>> ... Joe, W4TV
>>
>>
>> On 3/15/2012 12:18 PM, Paul Saffren N6HZ wrote:
>>> Many of you have asked if there is a way to modify your K3 so that it
>>> can
>>> provide enough current to supply a P3 with the SVGA board. We are
>>> currently
>>> working on a mod kit that will do just that. We'll let you know as
>>> soon as
>>> we have something available.
>>>
>>>
>>> 73,
>>>
>>> Paul (n6hz)
>>>
>>>
>>> --
>>> View this message in context:
>>>
http://elecraft.365791.n2.nabble.com/K3-12VDC-OUT-increased-current-mod-available-soon-tp7376146p7376146.html>>>
>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>>> Help:
http://mailman.qth.net/mmfaq.htm>>> Post: mailto:
[hidden email]
>>>
>>> This list hosted by:
http://www.qsl.net>>> Please help support this email list:
http://www.qsl.net/donate.html>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/mmfaq.htm>> Post: mailto:
[hidden email]
>>
>> This list hosted by:
http://www.qsl.net>> Please help support this email list:
http://www.qsl.net/donate.html>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
