K3 1750Hz roger beep

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 1750Hz roger beep

rfenabled
(Snip)
I stand in defence of Alexandr on this, it was something I asked for  
before the first production run - I'm still having treatment for the  
burns - so please, accept that not everyone feels this is not a good  
idea (just as I would defend you for asking for wide-band Tx in VK  
because your band plans are different).
As long as this is configurable, I don't see where the problem is. If  
VK decide this is unacceptable in VK, then people wont use it there.
However, it is acceptable over here in G land and is used quite a lot  
on V/UHF -  there are two factions here, those that think it helps in  
poor conditions, and those that think it looses you a second during  
the over - not come across any that feel it makes it harder or  
distracting - I personally quite like the idea.
73 de M0XDF
(End Snip)

I do NOT support wide band modes on ssb for example, nor after market audio enhancers that take up excessive bandwidth. We too have boat anchor operators running wide band equalisers trying to sound like FM stations and they are NOT popular with a very large number of VK Hams.

I have found very few operators here that view roger beeps as a good thing.

The problem arises when the operator does NOT turn it off when it is not needed. To say you use it on FM/AM may be fine, BUT, the question remains, will, say in ssb, the operator  remember to turn it off?

73's
Gary

Sent via BlackBerry® from Telstra
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 1750Hz roger beep

M0XDF
perhaps not a good term - I meant opening up the transmission freq so  
it will Tx on band's outside of those used in the US, for example.
--
Not all those that wander are lost. -J.R.R. Tolkien, novelist and
philologist (1892-1973)

On 6 Oct 2009, at 21:29, [hidden email] wrote:

> I do NOT support wide band modes

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 1750Hz roger beep

M0XDF
In reply to this post by rfenabled
oh and here, we using on SSB v/uhf - not heard it on FM or AM
--  
A society grows great when old men plant trees whose shade
they know they shall never sit in. -Greek proverb

On 6 Oct 2009, at 21:29, [hidden email] wrote:

> The problem arises when the operator does NOT turn it off when it is  
> not needed. To say you use it on FM/AM may be fine, BUT, the  
> question remains, will, say in ssb, the operator  remember to turn  
> it off?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html