Nandu,
Use the latest K3 Utility to check your filter assignments. There is
now a filter assignment for USB and for LSB. Make certain you have the
correct filters assigned for both LSB and USB.
73,
Don W3FPR
On 11/22/2010 9:49 PM, Nand Kishore wrote:
> Yesterday,while chasing ZL8X on various bands and modes,on 40m LSB
> I could not get RX audio.Changing to USB got the audio back.
>
> Checked on other bands,toggling between usb/lsb gives dead silence
> on lsb.
> RF gain wide open.Af gain same all bands and modes.AGC-F. Filter
> as wide as can go.No VOX ,only PTT in use.
> Latest regular F/W installed.
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html