K3 2nd Receiver IF Output?

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 2nd Receiver IF Output?

Craig-89
Does the K3's second receiver have a buffered IF
output as well?

Craig
VK3HE


       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K3 2nd Receiver IF Output?

KK7P
> Does the K3's second receiver have a buffered IF
> output as well?

The main and sub receivers each provide a buffered IF output.  The KXV3
has a single IF out connector.  At the present time, you must choose
which receiver you will attach to the output connector on the KXV3.

73,

Lyle KK7P

PS - Yes, we are looking at the possibility of providing a means to
switch the output jack between the two receivers.  LJ

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K3 2nd Receiver IF Output?

Brendan Minish
On Fri, 2007-06-22 at 06:27 -0700, Lyle Johnson wrote:

> The main and sub receivers each provide a buffered IF output.  The KXV3
> has a single IF out connector.  At the present time, you must choose
> which receiver you will attach to the output connector on the KXV3.


Why not use a triax BNC connector and have a triax to 2x BNC sockets
breakout cable and just use a triax patch lead to connect to the
spectrum scope when it comes along

73
Brendan EI6IZ



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com