K3 3.04 Power Output After Tune

[K8RDD]

Here ya go Wayne.

Config TUN PWR       nor

Config PWR SET       per band

Band and Mode all bands      phone usb and lsb

and front panel PWR control.  120w

I can't seem to change to cw mode and have it correct the low power out after tune. I have cw wght set to ssb+cw btw.  I actually turn the power control cw (up) even though it is maxed on the lcd, and after several turns all is ok until the next tune. I tried different setting on tun pwr and pwr set with no change. I have cleared tuner mem settings with no help. This k3 seems to have lower output than my other k3. s/n 2737 vs  s/n1194. It's about 20w less on phone. I've seen this since k3fw3r03 btw. k3fw2r82 and before has normal power out after a tune, although still quite a bit lower than the s/n 1194. 100w on s/n1194 shows 100w on my peak reading meter. 2737 around 70w depending on band. I'm sticking with 2r82 for now.
Randy
K8RDD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html