Jetti,
It would seem that you are having a multitude of strange behaviors. The
usual thing to try is an EEINIT, but before doing that, try to use K3
Utility to save your parameters (or better yet, have a prior
configuration save done before the problems surfaced). Try an EEINIT
and restore your parameters from a known good working set if possible -
if you do not have a good set of saved parameters, you may have to
restore all your settings manually.
Things do not "go to hell in a handbasket" with multiple symptoms unless
the data tables get scrambled, and it sounds like you have multiple
problems there.
73,
Don W3FPR
On 12/31/2010 8:34 PM, Jettie Hill wrote:
> HI SIG on readout. Blocks the RX. Sub RX seems to be OK, but things are going worse.
>
> Can't access Config or Menu
> No transmit output
> Frequency readout reverses while tuning
> Most button take 5 seconds after release
> Sub RX seems to work, except no frequency display
>
> Any ideas??
>
> Jettie B. Hill, W6RFF
> Roseville, CA 95661-5008
> 916-783-0383
> American Radio Relay League (ARRL)
> Since 1938. K3 #4951
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
