I have the five 60 meter channels set up in memory channels 10 through 14 with the asterisks so these channels truncate while tuning in either VFO or memory mode. VFO B shows 5150 Khz on all five of these channels. I did not program this frequency in VFO B for these channels. My other K3 shows the previous VFO A frequency in VFO B. It seems that VFO B can be any frequency and won't cause a problem. Are these strange frequencies in VFO B normal for these 60 meter channels?
Sometimes when I change bands in memory mode and switch to VFO mode AGC goes from slow to fast. If I change it back to AGC-S, it may remain in slow mode, but if I change bands it may go to AGC-F. AGC on all bands has been set to AGC-S with V>M. Am I overlooking something or doing something wrong? Thanks. Roy W4WFB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
