K3 60m ERR TXG

[Stewart Baker]

Following the recent posting of the European 60m BPF adjustments,
I decided to set mine up.

I am having difficulties getting a sufficient  bandwidth for the
UK allocation which is 5405kHz to 5260kHz i.e 145kHz.
The bandwidth between ERR TXG messages is approximately 120kHz.

I think that the US allocation runs between 5405kHz and 5332kHz
i.e 73kHz, so that should not give any errors.

Has anybody else had this problem ?

73
Stewart G3RXQ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[David Pratt-2]

In a recent message, Stewart Baker <[hidden email]> wrote
...
>I am having difficulties getting a sufficient  bandwidth for the
>UK allocation which is 5405kHz to 5260kHz i.e 145kHz.
>The bandwidth between ERR TXG messages is approximately 120kHz.
>
>Has anybody else had this problem ?

I had the problem with ERR TXG at 5260kHz (FA) initially when I received
my K3 s/n 0186, but after I peaked the two trimmers at 5290kHz (FC) the
K3 calibrates at 5W and 50W without any problem and runs full power over
the whole range from 5258.5 to 5406.5kHz.

73

--
David G4DMP
Leeds, England, UK
------


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Stewart Baker]

On Sat, 29 Mar 2008 13:38:57 +0000, David Pratt wrote:
> In a recent message, Stewart Baker <[hidden email]>
wrote
> ..
>> I am having difficulties getting a sufficient  bandwidth for
the
>> UK allocation which is 5405kHz to 5260kHz i.e 145kHz.
>> The bandwidth between ERR TXG messages is approximately 120kHz.
>>
>> Has anybody else had this problem ?
>>
> I had the problem with ERR TXG at 5260kHz (FA) initially when I
received
> my K3 s/n 0186, but after I peaked the two trimmers at 5290kHz
(FC) the
> K3 calibrates at 5W and 50W without any problem and runs full
power over
> the whole range from 5258.5 to 5406.5kHz.
>
> 73

Thanks David. Another one for support I think ...

73
Stewart G3RXQ

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com