When using digital modes (excepting CW) I run my K3/100 with a SignaLink
USB. Normally I don't use digital modes on 6 or 2 (I have a K144XV
installed), but recently I installed the WSJT 9 Suite and noticed the
following peculiarity -- on 6 meters only -- which is also audible
through the speaker. There is considerably less audio on 6 meters for a
given set of front-panel settings than on all the other bands.
I normally run LINE OUT = 08, but on 6 meters, to the WSJT 9.02 suite,
to get the ~0 dB reading I have to run LINE OUT around 30-35. On 2
meters the LINE OUT setting is the usual LINE OUT = 08.
This is not a problem, but it does have me a bit puzzled. Any
suggestions out there? I have doubtless overlooked some CONFIG setting?
John Ragle -- W1ZI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
