K3 836 noTX

[charles-70]

ERR TXF error message received when attempting low power calibration.

No power out on CW or SSB.

I have studied the trouble shooting pages in the Owner's manual but cannot
find the answer.

Any suggestions please?

Charles - M0BIN
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Augie "Gus" Hansen]

charles wrote:
> ERR TXF error message received when attempting low power calibration.
>
> No power out on CW or SSB.
>
> I have studied the trouble shooting pages in the Owner's manual but cannot
> find the answer.
>
> Any suggestions please?

ERR TXF is a recently added error code (see the errata
pages). It means
"The crystal filter selected for transmit in the present
mode is either
too narrow or too wide."

Be sure to specify the correct filters in your configuration
on a per
mode basis. See page 44 in the Owner's Manual.

Gus Hansen
KB0YH


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com