|
"I was on 30m cw, swr about 1.1 when suddenly I noticed my output drop from
100W to about 40W and the swr had risen to 4 or so." Do you have a KAT3 installed? Doesn't matter if it was bypassed or not. Several of us have had similar problems. In my case, this occurred on 20 meters, and then again on 30 meters. And while the SWR wound up recovering OK on those bands, I wound up with a residual SWR on 17-10 meters that would not go away - and I only resolved this by having the KAT3 replaced. I bring this up each time someone reports something similar, as I believe there is something here that needs to be addressed. Phil - AD5X _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
No, I don't have the KAT3 installed, but it sounds as if it might be the same sort of thing. Thanks anyway, perhaps it won't happen again! 73 Stephen On 29/05/2008 16:54, "Phil & Debbie Salas" <[hidden email]> wrote: > "I was on 30m cw, swr about 1.1 when suddenly I noticed my output drop from > 100W to about 40W and the swr had risen to 4 or so." > > Do you have a KAT3 installed? Doesn't matter if it was bypassed or not. > Several of us have had similar problems. In my case, this occurred on 20 > meters, and then again on 30 meters. And while the SWR wound up recovering > OK on those bands, I wound up with a residual SWR on 17-10 meters that would > not go away - and I only resolved this by having the KAT3 replaced. > > I bring this up each time someone reports something similar, as I believe > there is something here that needs to be addressed. > > Phil - AD5X > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
In reply to this post by Phil Salas
Forgot one thing about the 30m VSWR situation:
While the ATU was trying to tune the antenna, it started at something like 25-1. It got down to about 6-1 after quite a bit of noise, but all during this time my external wattmeter indicated zero power output. On all the other bands, it shows a low power while tuning. It also produced no power when I keyed it after tuning. 73, Fred K6DGW - Northern California Contest Club - CU in the 2008 Cal QSO Party 4-5 Oct 08 - www.cqp.org _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
And you are sure the antenna and coax connections are O.K.?????
Dave W7AQK ----- Original Message ----- From: "Fred Jensen" <[hidden email]> To: "Elecraft Reflector" <[hidden email]> Sent: Thursday, May 29, 2008 3:27 PM Subject: Re: [Elecraft] K3: A funny thing happened > Forgot one thing about the 30m VSWR situation: > > While the ATU was trying to tune the antenna, it started at something > like 25-1. It got down to about 6-1 after quite a bit of noise, but all > during this time my external wattmeter indicated zero power output. On > all the other bands, it shows a low power while tuning. It also > produced no power when I keyed it after tuning. > > 73, > > Fred K6DGW > - Northern California Contest Club > - CU in the 2008 Cal QSO Party 4-5 Oct 08 > - www.cqp.org > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
| Free forum by Nabble | Edit this page |
