Joe,
Use the ACC for the band switching connection and use the KEY OUT to do the
PTT. In other words, separate cables.
73,
Bob W5OV
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Joe G
Sent: Monday, May 11, 2009 5:05 AM
To:
[hidden email]
Subject: [Elecraft] [K3] K3 ACC Connector
Hello all
I just purchased an Ameritron ALS-600 amp which does band switching. For
bandswitching, they suggest interfacing it with the K3 through their ARI-500
( for cabling reasons).
This set up for the K3 uses the ACC LP Key Out pin to key the amp...not the
Key Out RCA jack.
The Amp will not key...if I put 40W in I get 40W out.
Bandswitching works fine.
If I hook the K3 and the ALS-600 in the non bandswitch mode and use the Key
Out RCA jack the amp keys fine.
I would appreciate any help
Joe
W1JGS
-----
Joe
W1JGS
--
View this message in context:
http://n2.nabble.com/K3-ACC-Connector-tp2862150p2862150.htmlSent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html