Thank you, Don, and thanks to all who replied on and off list.
Am 14.03.2010 03:31, schrieb Don Wilhelm:
> Martin,
>
> ACC Pin 10 is a low power (10 ma. max) copy of the KEYOUT connector on
> the rear panel. It is open circuit until the K3 is keyed (or PTT or
> VOX), and then it goes to a closed circuit condition.
> So yes, the K3 pulls this pin to ground during transmit, and it should
> work well for keying a transverter.
>
--
73, DM4iM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html