K3 AGC settings used in CQ WW CW

[Steve Ireland]

G'day

 

Prior to the CQ WW CW contest, I did some experimentation with the K3 AGC
settings (rev 4.51 firmware). I started with the AGC SLP set to 0 and the
AGC THR to 8.  After some problems with the AGC action on stronger signals
(S9 to S9 plus), I increased the SLP to 2 and found that there was no longer
any need to turn the AGC off and ride the RF gain on these signals.

 

These settings worked well for me here in Western Australia, but the signal
levels aren't as high as they would be in Europe or North America.

 

Vy 73

 

Steve, VK6VZ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html