K3 ALC Meter Reading

[Dan Nixon]

Have a two year old K3, latest firmware installed. I have noticed for some time that the ALC reading during SSB operations does not sho any bars at all. My Mic Gain is set to about 20, Compression to 25 and I receive good audio reports. There is however no ALC indication. Any help woulw be appreciated......Thanks.

[Dan Nixon]

Issue has been resolved. After digging deeper into my settings I found that I had somehow turned the bias on. Upon turning this off and setting the mic gain to High I immediately had what appears to be normal ALC indication. I suspect this happens when you operate mostly CW and data modes.......