K3 ALC Mod Question

[Robert Dorchuck]

Help...  In the ALC Mod at the junction of the three resistors (69.8K,100K & 137K)

is this junction also soldered to pin 12 of the header?  I am guessing yes but I

cannot tell from the photos.  Trying to put all the mods in before I install the second

receiver.

Thanks,

Bob  W6VY

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dave, G4AON]

Yes, they connect to pin 12. It needs a single line in the mod sheet to
avoid this confusion, I had the same question but knew someone who had
done the mod before me... I didn't need the mod as my linear doesn't
output ALC, but for the sake of completeness I did the mod (and the 2K2
resistors) while I had the I/O module out for another mod.

73 Dave, G4AON
K3/100 #80
--------------

Help... In the ALC Mod at the junction of the three resistors
(69.8K,100K & 137K)
is this junction also soldered to pin 12 of the header? I am guessing
yes but I
cannot tell from the photos. Trying to put all the mods in before I
install the second
receiver.
Thanks,
Bob W6VY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html