[K3]: APF or Dual PB? You can have both!

[Richard Squire - HB9ANM]

Like some others have reported, I often tapped the DUAL PB button instead of holding it, thereby selecting the SSB filter instead of engaging the APF...

To avoid this, I chose to assign the APF to setup "II" of the HICUT/WIDTH button, so an unintentional "tap" would only switch between HICUT and WIDTH... which is not so annoying.

Then changing CONFIG:DUAL PB to NOR again, setup "II" kept the APF and now, switching between "I" and "II", I can choose between APF and DUAL PB without going through the CONFIG procedure. I find this very convenient indeed.

73 es HNY to all
Richard - HB9ANM

[Al Baker-3]

If anyone has the manual for this accessory, I would appreciate being refreshed
as to tuning the 2 pots on the circuit board to match the radio.

Thanks and HNY de Al, W5IZ




________________________________



     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[David Christ]

I would try contacting K0QVF.  Both the Idiom Press site and his site
<http://k0qvf.com/> says he repairs these units.  He should have a
copy.

David K0LUM

At 7:06 AM -0800 12/30/10, Al Baker wrote:

>If anyone has the manual for this accessory, I would appreciate
>being refreshed
>as to tuning the 2 pots on the circuit board to match the radio.
>
>Thanks and HNY de Al, W5IZ
>
>
>
>
>________________________________
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html