[K3] Add to NTCH and APF

[Petr, OK1RP/M0SIS]

Hi all,

ad NTCH: Is there possibility to save the NTCH setting on K3 somehow please?
It is really boring to adjusting it again and again after each turning ON
the K3. :) I though about some menu item like "NTCH save" ON/OFF in order to
choosing in between saving or not saving the NTCH permanently. Even better
per band or not per band setting.

ad APF: I realized that on KX3 the resolution is switched to finest (1Hz)
automatically when APF is turned ON. Is it possible to do it on K3 also? I
did not found anything in menu. It should be fine to have menu item "APF
fine dial" ON/OFF or it could be permanent functionality for APF to have 1Hz
resolution while it is activated.

Btw: APF is one of the most magic feature on K3/KX3...hi. Many DX I catch
thanks to this function.

73 - Petr, OK1RP



-----
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [e-mail]

[Petr, OK1RP/M0SIS]

...silent :)



-----
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill W4ZV]

Hi Petr,

Have you tried Save and then Restore Config in the K3 Utility?  I know this
is somewhat inconvenient but it might work (don't know if it will but worth
a try).

73,  Bill  W4ZV



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill-4]

write a macro??

Bill W2BLC K-Line


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Petr, OK1RP/M0SIS]

Hi,

thanks both guys for hints...

I fact I though that it should be more comfortable to implement it easily
into the next f/w revision of K3/K3S... :)

Best regards,
73 - Petr, OK1RP



-----
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]