I recently purchased K3-100 s/n 20xx fitted with 2.7/400/250 filters, KAT3,
KIO3 & KBPF3. Loaded into memory-3 is 3535 cw and in memory-1 0.917.5
AM.
If, after selecting memory 3 I select memory 1, the frequency changes but
the antenna does not reconnect. (a weak signal is heard). If I tap ANT,
A/B or REV the antenna connects and levels jump to 40 over S9.
Tuning down from 1.800 there is a relay change click heard at 1.700, at this
relay change the antenna also disconnects. Rocking the vfo up and down
about 1.700 connects and disconnects the antenna.
Is this a menu setting I am missing or something else? Suggestions?
73
Nigel ZL2DF
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]