This should not matter pressing the XMIT button.
John
John KK9A
Dave Sublette k4to.dave at gmail.com
Are you in CW mode? If so, is VOX enabled?
K4TO
>>
>> On 04/09/2018 08:31 AM, Martin Sole wrote:
>>
>>> Hi,
>>>
>>> My K3 died today, somehow. The radio works fine on receive and appears
>>> to transmit just there is no power indication on my external meter or on
>>> the front panel when pressing TUNE. There is ALC indication but no power
>>> out indication.The only thing I did different was to switch off the
supply
>>> before the radio, something I normally never do. Having noted others
having
>>> issues with that I reloaded the firmware. Still no output. Starting to
>>> think that somehow the PA is fried or possibly the driver as there is
>>> nothing from the 10 watt PA either. Tried turning the power down and
>>> putting the KPA3 into bypass. Still no power output. Not sure what
else to
>>> try before I tear into it. Was going great, worked 3B7A on 3 bands
today no
>>> problem.
>>>
>>> Suggestions appreciated.
>>>
>>> Thanks
>>> Martin, HS0ZED
>>>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
