K3 Auto antenna switching

[Edward R Cole]

I was looking at the ACC features and have a question about
DIGOUT1.  Does this feature have any use without the KAT3?  I wonder
if there is map for its output states by band (or how one does this -
it would be handy for me to use this for 6m-eme to enable INHIBIT
when on 6m).  I currently use BAND0 enable INHIBIT for my other
VHF/UHF bands (the HI biases a NPN relay driver in my station control box).


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
DUBUS Magazine USA Rep [hidden email]
======================================

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Cady, Fred]

HI Ed,
You should be able to go into CONFIG: DIGOUT1 and then step through the
bands to map out DIGOUT1 ON or OFF. It doesn't require the KAT3.
73,
Fred


Fred Cady
fcady at ieee dot org
"The Elecraft K3: Design, Configuration and Operation"
www.ke7x.com

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of Edward R. Cole
> Sent: Thursday, August 25, 2011 12:01 PM
> To: [hidden email]
> Subject: [Elecraft] K3 Auto antenna switching
>
> I was looking at the ACC features and have a question about
> DIGOUT1.  Does this feature have any use without the KAT3?  I wonder
> if there is map for its output states by band (or how one does this -
> it would be handy for me to use this for 6m-eme to enable INHIBIT
> when on 6m).  I currently use BAND0 enable INHIBIT for my other
> VHF/UHF bands (the HI biases a NPN relay driver in my station control
> box).
>
>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
> BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
> DUBUS Magazine USA Rep [hidden email]
> ======================================
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html